Antminer DR3 (7.8Th)
| Hashrate | Power | Algorithm |
|---|---|---|
| 7.8 Th/s | 1410 W | Blake256R14 |
Description
Antminer DR3 is a miner produced by Bitmain that uses the Blake256R14 algorithm with a mining hashrate of 7.8 Th/s and a consumption of 1410 Watts.
Specifications
| Manufacturer | Bitmain |
|---|---|
| Model | Antminer DR3 |
| Release | September 2018 |
| Size | 130 x 187 x 293mm |
| Weight | 4200g |
| Chip boards | 3 |
| Chip count | 162 |
| Noise level | 76db |
| Fan(s) | 2 |
| Power | 1410W |
| Voltage | 12V |
| Interface | Ethernet |
| Temperature | 5 - 40 °C |
| Humidity | 5 - 95 % |
Profitability
| Daily | Monthly | Yearly | |
|---|---|---|---|
| Income (Decred) | $0.28 0.0212 DCR |
$8.31 0.6351 DCR |
$101.04 7.7273 DCR |
| Electricity | -$3.38 | -$101.52 | -$1,235.16 |
| Profit | -3.11 | -93.21 | -1,134.12 |
Profit 0%
Electricity 100%
Minable Coins
ScPrime (SCP)
Frequently Asked Questions (FAQ)
Antminer DR3 (7.8Th) generates an approximate daily profit of $-3.11 based on the electricity cost of $0.10 per kWh.
This profit amount is not fixed — it can fluctuate depending on the global hashrate, network difficulty, mined block reward, and cryptocurrency exchange rate.
This profit amount is not fixed — it can fluctuate depending on the global hashrate, network difficulty, mined block reward, and cryptocurrency exchange rate.
Antminer DR3 (7.8Th) has a mining power of 7.8 Th/s and uses the Blake256R14 algorithm.
Yes, Antminer DR3 (7.8Th) consumes approximately 1410W per hour.
Electricity is an important factor in mining profitability, as a high electricity cost can significantly reduce profit. In our case, the Antminer DR3 (7.8Th) consumes approximately $3.38 daily.
The average lifespan is 3–5 years or more, depending on usage intensity, environmental factors (temperature, humidity, dust), and whether proper maintenance is followed.